For Right click CPS test, reset the run and repeat check 1 with the same device. If the context menu opens, change one connection or system setting, then compare a fresh sample before deciding that the hardware has failed.
Part of the CPS test. Run the full cps test first to compare input modes and click speed.
The context menu opens Left clicks change the score The timer does not start
Right click CPS test
Run the CPS clock from right-button pointer events while suppressing the context menu inside the pad.
Also known as: right click cps test, right cps test, right click speed test, right click test, right click cps. Free, online, and no download required.
No permission neededNothing uploaded
Right-click the pad to start the selected timer.
01
What the right click CPS test checks
| Check | How it is measured | Fails when |
|---|---|---|
| Right-button count | Only pointerdown events with button index 2 are counted. | Another button changes the total. |
| Context menu | contextmenu is prevented only within the active pad. | The menu interrupts a run. |
| Rate summary | Total, elapsed time, peak window and 250 ms spread are calculated. | The sample ends before three valid events. |
How to run the right click CPS test
- Prepare the device and close any application that could reserve the same input or media stream.
- Start the right click cps test, follow the live prompt and complete every named control or direction.
- Finish the run, record the verdict and repeat once before changing one setting or connection.
If something failed
For Right click CPS test, reset the run and repeat check 2 with the same device. If left clicks change the score, change one connection or system setting, then compare a fresh sample before deciding that the hardware has failed.
For Right click CPS test, reset the run and repeat check 3 with the same device. If the timer does not start, change one connection or system setting, then compare a fresh sample before deciding that the hardware has failed.
02
How to read the result
How the right click cps test works
This focused CPS page reuses the same performance clock, bucket accumulator, history format and share payload as the main CPS tool. The input predicate accepts only button index 2, and contextmenu prevention is attached to the pad rather than the document. Follow the how to increase cps when you need a complete troubleshooting sequence.
Use the right click cps test in a visible foreground tab and keep the device, connection and duration unchanged. Repeat the same action enough times to separate one missed browser event from a persistent pattern. Record the displayed value before changing one setting, then run the same sequence again.
During Right click CPS test, the live readouts update from bounded counters and recent samples. Complete every requested direction, key, channel or phase before finishing. Reset between devices so events from an earlier run cannot alter the next verdict, and keep the tab focused whenever timing or event frequency is part of the result.
What the result can establish
Keep the pointer inside the pad, use the same duration when comparing runs and open the mouse test separately when the goal is switch-fault checking.
Use the right click cps test in a visible foreground tab and keep the device, connection and duration unchanged. Repeat the same action enough times to separate one missed browser event from a persistent pattern. Record the displayed value before changing one setting, then run the same sequence again.
Read pass as confirmation of the collected sample, warn as a repeatable concern that needs comparison, fail as a missing or abnormal signal with a direct next action, and inconclusive as too little valid input. The number in the detail explains which threshold or count produced the status for Right click CPS test.
Measurement limits
The score measures speed, not a mouse fault. Rapid duplicate events are not removed because that would hide the actual browser event stream.
The Right click CPS test reads only signals that the operating system and browser expose to this page. It cannot inspect physical wear, firmware queues, electrical contacts, analogue circuitry or another application's private processing. A clean run confirms the observed sample, while an intermittent fault may require a longer repeat under the same conditions.
Browser scheduling, power saving, wireless transport, display timing and background work can alter the values shown by Right click CPS test. Compare results only when those conditions match. Do not treat a small difference as a hardware change unless it repeats across several controlled runs.
03
Right click CPS test questions
Why does the context menu not open during this run?
The contextmenu event is prevented inside the click pad only, so a right click speed test never gets interrupted by a menu. Outside the pad, the browser's own right-click menu keeps working exactly as usual.
Do left clicks count in this right click test?
No. Only pointerdown events with button index 2 increment the total, so resting your hand on the left button or clicking by accident cannot change the score. Everything else about the timer matches the standard CPS run.
Can I compare a right CPS test with a normal CPS run?
Compare them only as separate categories. The clock, buckets and history format are identical, but most hands are noticeably slower on the right button, so mixing the two into one personal best hides which mode produced it.
What is a good right click CPS?
What is a good right click CPS is answered by the live values in this right click cps test. Complete every named input, repeat the failed action and compare one changed connection or setting. The browser can confirm only the events or media it receives. Use additional check 1 to decide whether the same symptom follows the device into another application.
How should I repeat the right click cps test fairly?
For right click cps test, keep the same browser window, foreground state, device connection and test duration for both runs. Reset the counters, repeat the requested actions in the same order and compare the displayed values. If the samples disagree, collect a third run before changing hardware or settings so one scheduling delay does not control the decision.
What can the right click cps test not prove?
The right click cps test cannot see hidden firmware, switch wear, electrical faults or processing inside another application. It confirms only the events, media tracks or rendered frames delivered to this page during the sample. Use the result to select one next check, then verify any change in the application where the original symptom occurs.